2024 John Deere 2430C Applicator Base

2024 John Deere 2430C Applicator

• 19- and 25-row configurations

• Redesigned 25-row model with improved transport dimensions

• TruSet™ Tillage technology

Features may include:

• Beginning with model year 2022, the 2430C Nutrient Applicator includes everything producers enjoyed about the previous 2430C, but with improved transport dimensions.

• The 25-row, 19-m (62.5-ft) 2430C is available with a 4.3-m (14-ft) transport height (0.76 m [2.5 ft] lower than the previous model).

• The updated 5.5-m (18-ft, 2-in.) transport width is 1.1 m (3.6-ft) narrower than the previous 25-row model.

• The placement of the outer wings allows maximum working widths and low transport height under bridges and utility lines.

• The 2430C Nutrient Applicator is available in two machine configurations:

• 19 row – 3.66-m (12-ft) center frame, five-section, 305-mm (30-in.) spacing

• 25 row – 3.66-m (12-ft) center frame, five-section, 305-mm (30-in.) spacing

• The five individual frame sections can be adjusted independently of each other. The operator can tailor the depth setting of individual sections to ensure proper product sealing and fertilizer placement even in compressed wheel track areas and varying field conditions.

• Integrated TruSet Tillage technology enables operators to respond to changing field conditions such as varying soils, heavier residue, and moisture by adjusting depth while on the go.

• With a short window of time to perform tillage operations, TruSet can provide significant productivity improvements as operators can adjust the nutrient applicator with the push of a button while covering acres. By responding to conditions as they change throughout the field, TruSet enables operators to generate a better-quality tillage performance with the first pass.

• Using a Gen 4 display, an operator sees real-time data for depth control, providing assurance of desired tillage outcomes. Once the actual set point is validated and configured to the display in the cab, operators can make independent adjustments as small as 2.5 mm (0.1 in.). Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions.

• With integrated TruSet Tillage technology, operators can document nutrient application depth. The tillage documentation feature allows producers to capture and analyze the pass for additional coverage of the crop production cycle.

• Single-point depth control is included on all 2430C models. Hydraulic routings on the 2430C are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.

• The depth stop and valve are mounted directly to the frame and cylinder pins for precise, repeatable depth settings. Single-point depth control:

• Provides 6 mm (0.25 in.) of operating depth change per turn

• Simple up-front location depth adjustment for the entire machine

• Cylinder eyebolt adjustment for frame leveling

• Valve assembly attached to the frame and front castering wheel assembly for consistent and repeatable valve activation

• Valve assembly attached to the frame and cylinder pins to promote consistent and repeatable valve activation