Pumps
WSP33
Overview:
1/3 hp 115V submersible pump
- Top discharge
- 40 gal./min capacity
- Lightweight durable stainless steel casing
- Automatic non-mercury float switch
- Rated for continuous use
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
1/3hp, 115V submersible pump
115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
40 gal./min capacity
Rated for continuous use
Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
Solids handling up to 3/8"
Move slurry and dirty liquids without the worry of damaging the pump.
Lightweight durable stainless steel casing
The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
Automatic non-mercury float switch
Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
Built in thermal reset switch
If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
20 foot heavy duty cord
Top discharge
Great for applications where space is tight.
Operates fully or partially submerged
No need to worry about the water level for the pump!
Shielded ball bearings for added durability
Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
Efficient air-insulated motor
Oil lubricated double mechanical seals
Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
Specifications
| Pump Type | Submersible Standard |
| Starting Type | Automatic |
| Casing | Stainless Steel |
| Motor (HP) | 1/3 |
| Voltage | 115 |
| Starting amps | 10 |
| Running amps | 4 |
| Duty | Continuous |
| Motor insulation | Class F |
| Overhead protection | Built-In Thermal Automatic Reset |
| Discharge Type | Top |
| Discharge capacity | 40 gpm |
| Max. head (feet) | 23 |
| Port diameter ( inches) | 1.25 FNPT |
| Maximum pressure | 10 psi |
| Solids handling | 0.375" |
| Impeller | Thermo Plastic Noryl |
| Seals | Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal |
| Cord length (feet) | 20 |
| Cord type | Heavy-Duty 115V |
| Dimensions (WxH) | 6.4" x 10.3" |
| Pump diameter | 6.4" |
| Dry weight | 11 lbs. |