Disks
DH52F Series Folding Offset Disks
Overview:
- Adjustable disk blade scrapers
- Disk blades (notched or smooth) available in two sizes
- Rear hitch for attaching additional implement
- Oil bath tapered roller bearings minimize maintenance
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Adjustable disk blade scrapers increase productivity
Scrapers clean disk blades
Scrapers work great in wet and sticky soils
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
Clevis hitch is durable for those tough working conditions
Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs
The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.
Disk blades (notched or smooth) available in two sizes
Notched disk blades
Smooth disk blades
Disk blades are available in 66-cm or 71-cm (26-in. or 28-in.) diameters. Disk blades are available in smooth blades, notched blades, or a combination of front notched blades and rear smooth blades to meet a variety of needs.
For superior penetration in tough soil conditions, weight per blade ranges from 108.9 kg to 154.7 kg (240 lb to 341 lb) depending on the offset disk series and model.
End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
Oil bath tapered roller bearings minimize maintenance
Minimal maintenance increases work hours
Sealed with industrial-grade seals
Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
Rear hitch for attaching an additional implement
Allows operator to pull an additional implement
A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.
Transport locks secure disk wings
Transport locks secure disk wings cylinder
Transport locks are standard, ensuring disk wings are in secure transport mode.
Two separate control arms create consistent performance
Control arms level in ground and during transport
Easy to set for desired soil condition
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.
Specifications
Transport
| Width | 3.8 m 12.5 ft |
|---|---|
| Ground clearance with base blades | 20.3 cm 8 in. |
| Wheel hub bearings | Dual tapered roller bearings |
Working
| Approximate working width | 7.3 m 24 ft |
|---|---|
| Maximum penetration | 22.9 cm 9 in. |
Weight
| Net | 6804 kg 15000 lb |
|---|---|
| Weight per disk blade | 124 kg 273 lb |
Tractor requirements
| Recommended PTO hp range | 175-228 kW 235-306 hp |
|---|---|
| Recommended drawbar hp range | 149.1-193.9 kW 200-260 hp |
Frame
| Type | Single offset folding |
|---|---|
| Duty | Medium |
| Tube size | 15.2x15.2x0.95 cm 6x6x0.375 in. |
Hitch
| Front hitch type | Spade |
|---|
Disk blades
| Spacing | 26.7 cm 10.5 in. |
|---|---|
| Quantity | 57 |
| Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
| Blade concavity | Standard: high Optional: low |
Available blade sizes
| Blade option one | 660x7.9 mm 26x0.312 in. |
|---|---|
| Blade option two | 711x7.9 mm 28x0.312 in. |
Disk gangs
| Front angle | 2 Positions |
|---|---|
| Rear angle | 2 Positions |
| Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
| Axle material | Round heat treated alloy steel threaded on both ends |
| Bearing type | Oil bath tapered roller |
| Bearing wear plates | Standard |
| Bearing standards | Welded, Reinforced |
| Scrapers | Adjustable |
Lighting and safety
| Markings | SMV |
|---|---|
| Safety tow chain | Yes |
| Lights | Yes |
Tires
| Type | Implement - Quantity of 4 |
|---|---|
| Size | 12.5L x 15 10 ply in. |
| Wheel hub type | 8 Bolt |
Set-up time
| Labor hours | 4-6 for two people |
|---|
Warranty
| Time period | 1 year |
|---|