Flail Mowers and Shredders
25A Flail Mower
Overview:
- Adjustable cutting height
- Uses a heavy-duty gearbox with a rating of 65 hp
- Compatible with any Category 1 3-point hitch
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. This information is provided for illustrative purposes only and does not constitute an application.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Adjustable cutting height
Roller
The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.
Power take-off (PTO) drive shaft and gearbox
Heavy-duty gearbox
PTO drive shaft
All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.
The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.
36 flail-knife rotor provides uniform distribution of pulverized material
Rotor and knives
A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:
-
Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
- Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
- Knives pivot at their mounting points to minimize damage if an obstruction is hit.
Tractor hookup
Tractor hookup
The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).
iMatch compatibility starts with serial number 644700.
Specifications
Key Specs
Machine
| Cutting width | Centered Centered 1.98 m 78 in. |
|---|---|
| Cutting height | 13 to 127 mm 0.5 to 5 in. |
| Hood thickness | 3.2 mm 0.125 in. |
Blades
| Number | 72 (36 pairs) |
|---|---|
| Type | Smooth-cut, cupped-type |
Rotor
| Speed | 1,850 rpm |
|---|---|
| Diameter | 114 mm 4.5 in. |
Drives
| PTO | 540 rpm |
|---|---|
| Belts | Single HC section |
| Gauge roller | 140 mm 5.5 in. |
Tractor HP Required
| Minimum | 22 kW 30 hp |
|---|---|
| Maximum | 56 kW 75 hp |
3-Point Hitch
| Quick-coupler compatible | Yes (Category 1 and 2) |
|---|
Dimensions
| Overall width | 2.53 m 99 in. |
|---|---|
| Overall height | 0.99 m 39 in. |
| Overall length | 1 m 40 in. |
Weight
| Approximate | 278 kg 612 lb |
|---|